Hikvision AXHub manuals

Keypad cheat sheet

• Arm (away)your codethe key with a walking figure on it

  • These steps are for the keypad with a screen (DS-PK1-LT). For the keypad without a screen (DS-PK1-E), see its own guide.
  • Key in your code, or show your tag for under 3 seconds. Then press Away: the house with a person walking out.
  • If the arming check is on, the screen shows Waiting for arming, then any faults. Scroll through them, then press Away again to arm, or Disarm to stop.
  • Leave while the arm light flashes blue. Once armed, it glows solid blue for 5 seconds and the keypad beeps twice.
  • If your installer has turned them on, Away with no code arms (one-push arming), and a quick tag swipe arms (simple mode).

  Arm light flashing blue, slow beeps	Exit time: leave now
  Arm light solid blue for 5 seconds, two beeps	Armed
  Three short beeps	It did not arm

  Pages 1 to 4 of the DS-PK1-LT-WE/WB Series Wireless LCD Keypad User ManualPage 97 of the AX Pro User Manual
• Arm while homeyour codethe key with a house with a person in it on it

  • These steps are for the keypad with a screen (DS-PK1-LT). For the keypad without a screen (DS-PK1-E), see its own guide.
  • The AX PRO calls this Stay. Doors and windows arm; zones set to skip in Stay, often indoor motion detectors, stay off.
  • Key in your code or show your tag, then press Stay: the house with a person inside.
  • The same arming check and exit time run as for away. Press Stay again during the exit time to arm straight away.
  • If your installer has turned on simple mode, holding your tag to the keypad for 3 seconds or more arms in Stay.

  Arm light flashing blue, slow beeps	Exit time
  Arm light solid blue for 5 seconds, two beeps	Armed in Stay
  Three short beeps	It did not arm

  Pages 1 to 4 of the DS-PK1-LT-WE/WB Series Wireless LCD Keypad User ManualPages 36, 61 of the AX Pro User Manual
• Disarmyour codethe key with a padlock on it

  • These steps are for the keypad with a screen (DS-PK1-LT). For the keypad without a screen (DS-PK1-E), see its own guide.
  • Key in your code or show your tag, then press Disarm: the house with a padlock. The arm light turns green.
  • Under threat, key in your duress code, if you have one, instead of your own. It disarms and sends a duress alarm.
  • If your installer has turned on simple mode, a quick tag swipe disarms.
  • To work one area only, key in your code, then #, the area number, then Away, Stay or Disarm.

  Arm light flashing green, fast beeps	Entry time: disarm now
  Arm light solid green	Disarmed
  Three short beeps	It did not work: try again

  Pages 1 to 4 of the DS-PK1-LT-WE/WB Series Wireless LCD Keypad User ManualPage 68 of the AX Pro User Manual
• Silence an alarmyour codeholdthe key with a padlock on it

  • These steps are for the keypad with a screen (DS-PK1-LT). For the keypad without a screen (DS-PK1-E), see its own guide.
  • Key in your code or show your tag, then hold Disarm (the house with a padlock) for 3 seconds or more.
  • A short press of Disarm after your code disarms instead.
  • The Hik-Connect app also has a Silent Alarm button that silences every area.

  Alarm light (top right) flashing red	An alarm has gone off
  Alarm light solid red	A tamper alarm, such as a cover taken off
  Repeating alarm sound	A fire, medical, panic or lid-open alarm

  Pages 1 to 3 of the DS-PK1-LT-WE/WB Series Wireless LCD Keypad User ManualPage 61 of the AX Pro User Manual
• Bypass a zone

  • These steps are for the keypad with a screen (DS-PK1-LT). For the keypad without a screen (DS-PK1-E), see its own guide.
  • Each detector or door contact is a zone. A bypassed zone is left out, so it cannot set off the alarm.
  • Key in an administrator or installer code (only these open Settings), then press Settings: the spanner.
  • Pick Bypass/Restore Bypass to bypass a zone, or to bring a bypassed zone back. The Hik-Connect app can bypass zones too.

  Two short beeps	It worked
  Three short beeps	It did not work

  Pages 2 to 4 of the DS-PK1-LT-WE/WB Series Wireless LCD Keypad User ManualPage 66 of the AX Pro User Manual
• Panic alarm

  • These steps are for the keypad with a screen (DS-PK1-LT). For the keypad without a screen (DS-PK1-E), see its own guide.
  • Before using panic or medical, ask your installer which key is which: the manual swaps the functions of keys 2 and 3.
  • Once confirmed, hold the required key on its own for at least 3 seconds. You don't need a code.
  • Hold 1, the flame, the same way for a fire alarm. Your installer can switch these three keys off.
  • The keypad makes a repeating alarm sound, unless your installer has set panic or medical alarms to be silent.

  1 (flame), held	Fire alarm
  2 or 3, held separately	Panic or medical: confirm the key with your installer first

  Pages 1 to 3 of the DS-PK1-LT-WE/WB Series Wireless LCD Keypad User ManualPage 97 of the AX Pro User Manual
• Change a code

  • These steps are for the keypad with a screen (DS-PK1-LT). For the keypad without a screen (DS-PK1-E), see its own guide.
  • Key in an administrator or installer code (only these open Settings), then press Settings: the spanner.
  • Pick User Management to add, edit or delete users. Tag Management does the same for tags.
  • In the Hik-Connect app, User Management is where a user's keypad code and duress code are changed. Keypad codes are 4 to 6 digits.

  Two short beeps	It worked
  Three short beeps	It did not work

  Pages 2 to 4 of the DS-PK1-LT-WE/WB Series Wireless LCD Keypad User ManualPages 67 and 68 of the AX Pro User Manual
• Trouble lights

  • These are for the keypad with a screen (DS-PK1-LT). For the keypad without a screen (DS-PK1-E), see its own guide.
  • The fault light, the triangle at the top left, glows orange when there is a fault. It is off when all is well.
  • To see the faults, key in your code, press Query (the magnifying glass), then press # to confirm.
  • The Hik-Connect app shows faults too.

  Fault light orange	There is a fault: press Query to see it
  Alarm light (top right) flashing red	An alarm has gone off, or Find Me is on to locate the keypad
  Alarm light solid red	A tamper alarm, such as a cover taken off
  Arm light (house) solid blue	Armed
  Arm light solid green	Disarmed
  Arm light flashing blue, slow beeps	Exit time: leave now
  Arm light flashing green, fast beeps	Entry time: disarm now
  Two short beeps / three short beeps	It worked / it did not work

  Pages 1 to 3 of the DS-PK1-LT-WE/WB Series Wireless LCD Keypad User ManualPage 60 of the AX Pro User Manual